Revision as of 13:33, 27 October 2010 by Sbiddand (Talk | contribs)



Quiz Questions Pool for Week 10


Q1. Consider the following difference equation

$ y[n]=ay[n-1]+x[n]-x[n-1]\,\! $
a. Compute the transfer function $ H(z) $, and find its poles and zeros.
b. Compute the impulse response $ h[n] $ using a ROC of $ |z|>a $. For what values of $ a $ is the system stable?
c. Compute the impulse response $ h[n] $ using a ROC of $ |z|<a $. For what values of $ a $ is the system stable?

Q2. The condition for the discrete-time signal $ x[n] $ to be real is

$ x[n]=x^{\ast}[n] $

Then, what is the condition of the frequency response $ X(w) $ for $ x[n] $ to be real?

(Hint: Apply DTFT to the above equation)


Q3. Qp10q3system.jpg

The respective difference equation for each of these two systems in parallel above may be expressed as

y1[n] = ½ x[n] + ½ x[n-1]
y2[n] = ½ x[n] - ½ x[n-1]

Consider the respective outputs of these two systems as the inputs to a pair of length two FIR filters with impulse response, g1[n] and g2[n] respectively, as shown in the diagram.

a. Given that g1[0] = ½, determine the values of g1[n] and g2[n], where n = 0, 1, such that the difference equation for the overall system is simply

y[n] = x[n-1]

That is, determine length-2 FIR filters g1[n] and g2[n] so that output is the input delayed by one (for any input).

b. Let H(\omega) denote the frequency response of the overall system equal to the DTFT of h[n] below:

h[n] = h1[n] * g1[n] + h2[n] * g2[n]

Plot both the magnitude H($ \omega $) and the phase H($ \omega $) over -$ \pi $ < $ \omega $ < $ \pi $.


Q4.


Q5.


Back to ECE 438 Fall 2010 Lab Wiki Page

Back to ECE 438 Fall 2010

Alumni Liaison

Ph.D. 2007, working on developing cool imaging technologies for digital cameras, camera phones, and video surveillance cameras.

Buyue Zhang