Revision as of 04:44, 28 October 2011 by Jrholmes (Talk | contribs)

Topics from meeting (October 25th)

Created a list of all things that need to be interfaced with the processor and what kind of interface each one needs:

Media:Processor_interfaces.doc


Wireless Transceiver
Our choice of camera will impact what kind of bandwidth our wireless transceiver will need to handle . We determined that most image sensor cameras output too much data to be sent usefully over the internet (wireless transceiver can handle a max of 1 Mbit per second UART, but also has a 44MHz clock and SPI - so any reasonable data rate could be handled. A 640x480 color image from one of the cameras we looked at will produce about 16Mbits per second at 30 frames per second.) . We tried to figure out a way to either interface an IP camera to our website or reduce the amount of data coming from a camera. This will have to be done using MJPEG compression.



Back to LRVC Discussions

Alumni Liaison

Sees the importance of signal filtering in medical imaging

Dhruv Lamba, BSEE2010