Revision as of 18:06, 18 November 2013 by Gu8 (Talk | contribs)


solution of Homework 10

ECE438 Fall 2013


Question 1

(a)

HW10 Q1.jpg

 
$ \begin{align} U_g \\\end{align} $
$ \begin{align} V_g \\\end{align} $
 
= $ \begin{align} \frac{1}{1+r_0} \\\end{align} $
 
$ \begin{align} 1 \\\end{align} $ $ \begin{align} -r_0 \\\end{align} $
$ \begin{align} -r_0 \\\end{align} $ $ \begin{align} 1 \\\end{align} $
 
$ \begin{align} Z^{1/2} \\\end{align} $
 
$ \begin{align} 1 \\\end{align} $ $ \begin{align} 0 \\\end{align} $
$ \begin{align} 0 \\\end{align} $ $ \begin{align} Z^{-1} \\\end{align} $
 
$ \begin{align} \frac{1}{1+r_1} \\\end{align} $
 
$ \begin{align} 1 \\\end{align} $ $ \begin{align} -r_1 \\\end{align} $
$ \begin{align} -r_1 \\\end{align} $ $ \begin{align} 1 \\\end{align} $
 
$ \begin{align}Z^{1/2} \\\end{align} $
 
$ \begin{align} 1 \\\end{align} $ $ \begin{align} 0 \\\end{align} $
$ \begin{align} 0 \\\end{align} $ $ \begin{align} Z^{-1} \\\end{align} $
 
$ \begin{align} \frac{1}{1+r_2} \\\end{align} $
 
$ \begin{align} 1 \\\end{align} $ $ \begin{align} -r_2 \\\end{align} $
$ \begin{align} -r_2 \\\end{align} $ $ \begin{align} 1 \\\end{align} $
 
$ \begin{align}Z^{1/2} \\\end{align} $
 
$ \begin{align} 1 \\\end{align} $ $ \begin{align} 0 \\\end{align} $
$ \begin{align} 0 \\\end{align} $ $ \begin{align} Z^{-1} \\\end{align} $
 
$ \begin{align} \frac{1}{1+r_3} \\\end{align} $
 
$ \begin{align} 1 \\\end{align} $ $ \begin{align} -r_3 \\\end{align} $
$ \begin{align} -r_3 \\\end{align} $ $ \begin{align} 1 \\\end{align} $
 
 
$ \begin{align} U_L \\\end{align} $
$ \begin{align} 0 \\\end{align} $
 


= $ \begin{align} \frac{Z^{3/2}}{\pi_{k=0}^{3}(1+r_k)} \\\end{align} $
 
$ \begin{align} r_3(r_2(r_0r_1Z^{-1}+1)+(r_1+r_0Z^{-1})Z^{-1})Z^{-1}+r_0r_1Z^{-1}+(r_2r_1+r_2r_0Z^{-1})Z^-1+1 \\\end{align} $
$ \begin{align}-r_0-r_1Z^{-1}-(r_3(r_2r_0+r_2r_1Z^{-1}+r_0r_1Z^{-1}+Z^{-2}))Z^{-1}-r_2r_0r_1Z^{-1}+r_2Z^{-2}\\\end{align} $
 
$ \begin{align} U_L \\\end{align} $


= $ \begin{align} \frac{Z^{3/2}}{\pi_{k=0}^{3}(1+r_k)} \\\end{align} $
 
$ \begin{align}1+(r_0r_1+r_1r_2+r_2r_3)Z^{-1}+(r_0r_1r_2r_3+r_0r_2+r_1r_3)Z^{-2}+r_0r_3Z^{-3}\\\end{align} $
$ \begin{align}-r_0-(r_0r_1r_2+r_0r_2r_3+r_1)Z^{-1}-(r_0r_1r_3+r_1r_2r_3+r_2)Z^{-2}-r_3Z^{-3}\\\end{align} $
 
$ \begin{align} U_L \\\end{align} $


$ \begin{align} V(Z) \\\end{align} $ = $ \begin{align} \frac{U_L}{U_g} \\\end{align} $ = $ \begin{align} \frac{\pi_{k=0}^{3}(1+r_k)Z^{-3/2}}{1+(r_0r_1+r_1r_2+r_2r_3)Z^{-1}+(r_0r_1r_2r_3+r_0r_2+r_1r_3)Z^{-2}+r_0r_3Z^{-3}}\\\end{align} $



b) From the transfer function, we can see that there are three poles. If the poles are all real, there are three formants. If one pole is real and the other are complex pole pair, there are two formants.


c) We can change the area of each segments. In this way,$ r_k $ will change , thus the root of the denominator of V(Z) is changed, which determines the location of formants.


Unfortunately, this solution is wrong. Can anybody post a correction below? First student who posts a correct solution will get 1% bonus. Comments and questions are welcome too. -pm


Discussion/corrections

  • The expression for the transfer function is incorrect. First off, there are three tubes the air must go through, and so the top should represent a time delay by 3 time units. ($ z^{-3} $).
  • Here is an easier and cleaner way to create matrices in latex. (Look at the source code of the page to copy and paste.)
$ \left( \begin{array}{ccc} 1&2&3\\ 4&5&6\\ 7&8&9\end{array} \right) $


HW10 Q1.jpg

$ r0=\frac{A1-A0}{A1+A0}=1 $

$ r1=\frac{A2-A1}{A2+A1} $

$ r2=\frac{A3-A2}{A3+A2} $

$ \left( \begin{array}{c} Ad\left(z \right) \\ Cd\left(z \right) \end{array} \right)= $$ \frac{1}{2}\left( \begin{array} {cc} 1&-1 \\ -1&1 \end{array} \right) z\left( \begin{array} {cc} 1&0 \\ 0&z^{-2} \end{array} \right) \frac{1}{1+r1} \left( \begin{array}{cc} 1&-r1 \\ -r1&1 \end{array} \right) z\left( \begin{array} {cc} 1&0 \\ 0&z^{-2} \end{array} \right) \frac{1}{1+r2} \left( \begin{array}{cc} 1&-r2 \\ -r2&1 \end{array} \right) z\left( \begin{array} {cc} 1&0 \\ 0&z^{-2} \end{array} \right) \frac{1}{2}\left( \begin{array} {cc} 1&-1 \\ -1&1 \end{array} \right) \left( \begin{array}{c} Bd\left(z \right) \\ 0 \end{array} \right) $

$ \left( \begin{array}{c} Ad\left(z \right) \\ Cd\left(z \right) \end{array} \right)= \frac{z^{3}}{4\left(1+r1\right)\left(1+r2\right)} \left(\begin{array} {cc} X&Y \\ Y&X \end{array} \right) \left( \begin{array}{c} Bd\left(z \right) \\ 0 \end{array} \right) $

where $ X=\frac{r2 \left( \frac{r1}{z^{2}}+1 \right) + \frac{r1+\frac{1}{z^{2}}}{z^{2}}}{z^{2}} + \frac{r1}{z^{2}} + \frac{r2\left(r1+\frac{1}{z^{2}} \right)}{z^{2}} + 1 $


Back to HW10ECE438F13

Back to 2013 Fall ECE 438 Boutin

Alumni Liaison

Questions/answers with a recent ECE grad

Ryne Rayburn