Line 3: | Line 3: | ||
[http://balthier.ecn.purdue.edu/index.php/ECE662#Class_Lecture_Notes Class Lecture Notes] | [http://balthier.ecn.purdue.edu/index.php/ECE662#Class_Lecture_Notes Class Lecture Notes] | ||
− | + | == Lecture Objective == | |
− | + | ||
− | * | + | * Maximum Likelihood Estimation and Bayesian Parameter Estimation |
+ | * Parametric Estimation of Class Conditional Density | ||
− | + | See also: [[Comparison of MLE and Bayesian Parameter Estimation_OldKiwi]] | |
− | + | The class conditional density <math>p(\vec{x}|w_i)</math> can be estimated using training data. We denote the parameter of estimation as <math>\vec{\theta}</math>. There are two methods of estimation discussed. | |
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
MLE ([Maximum Likelihood Estimation]) | MLE ([Maximum Likelihood Estimation]) | ||
Line 22: | Line 16: | ||
BPE ([Bayesian Parameter Estimation]) | BPE ([Bayesian Parameter Estimation]) | ||
− | |||
− | |||
− | + | == Maximum Likelihood Estimation == | |
− | + | ||
− | .. | + | Let "c" denote the number of classes. D, the entire collection of sample data. <math>D_1, \ldots, D_c</math> represent the classification of data into classes <math>\omega_1, \ldots, \omega_c</math>. It is assumed that: |
− | + | - Samples in <math>D_i</math> give no information about the samples in <math>D_j, i \neq j</math>, and | |
+ | - Each sample is drawn independently. | ||
− | + | '''Example:''' The class conditional density <math>p(\vec{x}|w_i)</math> depends on parameter <math>\vec{\theta_i}</math>. If <math>X ~ N(\mu,\sigma^2)</math> denotes the class conditional density; then <math>\vec{\theta}=[\mu,\sigma^2]</math>. | |
− | + | ||
+ | Let n be the size of training sample, and <math>D=\{\vec{X_1}, \ldots, \vec{X_n}\}</math>. Then, | ||
− | + | <math>p(\vec{X}|\omega_i,\vec{\theta_i})</math> equals <math>p(\vec{X}|\vec{\theta})</math> for a single class. | |
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
+ | The **Likelihood Function** is, then, defined as <math>p(D|\vec{\theta})=\displaystyle \prod_{k=1}^n p(\vec{X_k}|\vec{\theta})</math>, | ||
which needs to be maximized for obtaining the parameter. | which needs to be maximized for obtaining the parameter. | ||
.. |loglikelihood1| image:: tex | .. |loglikelihood1| image:: tex | ||
− | + | :alt: tex: l(\vec{\theta})=log p(D|\vec{\theta})=\displaystyle log(\prod_{k=1}^n p(\vec{X_k}|\vec{\theta}))=\displaystyle \sum_{k=1}^n log(p(\vec{X_k}|\vec{\theta})) | |
− | Since logarithm is a monotonic function, maximizing the Likelihood is same as maximizing log of Likelihood which is defined as | + | Since logarithm is a monotonic function, maximizing the Likelihood is same as maximizing log of Likelihood which is defined as |
− | | | + | <math>l(\vec{\theta})=log p(D|\vec{\theta})=\displaystyle log(\prod_{k=1}^n p(\vec{X_k}|\vec{\theta}))=\displaystyle \sum_{k=1}^n log(p(\vec{X_k}|\vec{\theta}))</math>. |
"l" is the log likelihood function. | "l" is the log likelihood function. | ||
− | Maximize log likelyhood function with respect to | + | Maximize log likelyhood function with respect to <math>\vec{\theta}</math> |
− | + | <math>\rightarrow \hat{\theta} = argmax \left( l (\vec{\theta}) \right)</math> | |
− | + | ||
− | + | If <math>l(\vec{\theta})</math> is a differentiable function | |
− | + | Let <math>\vec{\theta} = \left[ \theta_1, \theta_2, \cdots , \theta_p \right]</math> be 1 by p vector, then | |
− | + | ||
− | + | <math>\nabla_{\vec{\theta}} = \left[ \frac{\partial}{\partial\theta_1} \\ \frac{\partial}{\partial\theta_2} \\ \cdots \\ \frac{\partial}{\partial\theta_p} \right]^{t}</math> | |
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
Then, we can compute the first derivatives of log likelyhood function, | Then, we can compute the first derivatives of log likelyhood function, | ||
− | + | <math>\rightarrow \nabla_{\vec{\theta}} ( l (\vec{\theta}) ) = \sum_{k=1}^{n} \nabla_{\vec{\theta}} \left[ log(p(\vec{x_k} | \vec{\theta})) \right]</math> | |
− | + | ||
− | + | ||
− | + | ||
and equate this first derivative to be zero | and equate this first derivative to be zero | ||
− | + | <math>\rightarrow \nabla_{\vec{\theta}} ( l (\vec{\theta}) ) = 0</math> | |
− | |||
− | |||
− | + | == Example of Guassian case == | |
Assume that covariance matrix are know. | Assume that covariance matrix are know. | ||
− | | | + | <math>p(\vec{x_k} | \vec{\mu}) = \frac{1}{ \left( (2\pi)^{d} |\Sigma| \right)^{\frac{1}{2}}} exp \left[ - \frac{1}{2} (\vec{x_k} - \vec{\mu})^{t} \Sigma^{-1} (\vec{x_k} - \vec{\mu}) \right]</math> |
− | + | '''Step 1: Take log''' | |
− | + | ||
− | + | <math>log p(\vec{x_k} | \vec{\mu}) = -\frac{1}{2} log \left( (2\pi)^d |\Sigma| \right) - \frac{1}{2} (\vec{x_k} - \vec{\mu})^{t} \Sigma^{-1} (\vec{x_k} - \vec{\mu})</math> | |
− | + | '''Step 2: Take derivative''' | |
− | + | <math>\frac{\partial}{\partial\vec{\mu}} \left( log p(\vec{x_k} | \vec{\mu}) \right) = \frac{1}{2} \left[ (\vec{x_k} - \vec{\mu})^t \Sigma^{-1}\right]^t + \frac{1}{2} \left[ \Sigma^{-1} (\vec{x_k} - \vec{\mu}) \right] = \Sigma^{-1} (\vec{x_k} - \vec{\mu})</math> | |
− | + | ||
− | + | '''Step 3: Equate to 0''' | |
− | + | <math>\sum_{k=1}^{n} \Sigma^{-1} (\vec{x_k} - \vec{\mu}) = 0</math> | |
− | + | <math>\rightarrow \Sigma^{-1} \sum_{k=1}^{n} (\vec{x_k} - \vec{\mu}) = 0</math> | |
− | + | ||
− | + | <math>\rightarrow \Sigma^{-1} \left[ \sum_{k=1}^{n} \vec{x_k} - n \vec{\mu}\right] = 0</math> | |
− | + | <math>\Longrightarrow \hat{\vec{\mu}} = \frac{1}{n} \sum_{k=1}^{n} \vec{x_k}</math> | |
− | . | + | This is the sample mean for a sample size n. |
− | + | ||
− | + | [[MLE Examples: Exponential and Geometric Distributions_OldKiwi]] | |
− | + | [[MLE Examples: Binomial and Poisson Distributions_OldKiwi]] | |
− | + | ||
− | + | '''Advantages of MLE:''' | |
+ | * Simple | ||
+ | * Converges | ||
+ | * Asymptotically unbiased (though biased for small N) | ||
− | |||
− | |||
− | + | == Bayesian Parameter Estimation == | |
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
For a given class, | For a given class, | ||
− | let | + | let <math>\bf{x}</math> be feature vector of the class and <math>\bf{ \theta }</math> be parameter of pdf of <math>\bf{x}</math> to be estimated. |
− | And let | + | And let <math>D= \{ \mathbf{x}_1, \mathbf{x}_2, \cdots , \mathbf{x}_n \} \\</math> |
− | , where | + | , where <math>\bf{x}</math> are training samples of the class |
− | + | Note that <math>\bf{ \theta }</math> is random variable with probability density <math>p( \bf { \theta } )</math> | |
− | + | ||
− | . | + | <center>[[Image:Equation1_OldKiwi.jpg]]</center> |
− | + | ||
− | + | where | |
− | + | ||
− | + | <center>[[Image:Equation2_OldKiwi.jpg]]</center> | |
− | + | '''Here is a good example:''' | |
− | + | http://www-ccrma.stanford.edu/~jos/bayes/Bayesian_Parameter_Estimation.html | |
− | |||
− | |||
− | |||
− | |||
− | + | == EXAMPLE: Bayesian Inference for Gaussian Mean == | |
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
The univariate case. The variance is assumed to be known. | The univariate case. The variance is assumed to be known. | ||
Line 224: | Line 122: | ||
Here's a summary of results: | Here's a summary of results: | ||
− | + | * Univariate Gaussian density <math>p(x|\mu)\sim N(\mu,\sigma^{2})</math> | |
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | * Prior density of the mean <math>p(\mu)\sim N(\mu_{0},\sigma_{0}^{2})</math> | |
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | * Posterior density of the mean <math>p(\mu|D)\sim N(\mu_{n},\sigma_{n}^{2})</math> | |
− | + | ||
− | + | where | |
− | + | ||
− | + | * <math>\mu_{n}=\left(\frac{n\sigma_{0}^{2}}{n\sigma_{0}^{2}+\sigma^{2}}\right)\hat{\mu}_{n}+\frac{\sigma^{2}}{n\sigma_{0}^{2}+\sigma^{2}}\mu_{0}</math> | |
− | + | ||
− | + | * <math>\sigma_{n}^{2}=\frac{\sigma_{0}^{2}\sigma^{2}}{n\sigma_{0}^{2}+\sigma^{2}}</math> | |
− | + | ||
− | + | * <math>\hat{\mu}_{n}=\frac{1}{n}\sum_{k=1}^{n}x_{k}</math> | |
− | + | ||
− | + | Finally, the class conditional density is given by <math>p(x|D)\sim N(\mu_{n},\sigma^{2}+\sigma_{n}^{2})</math> | |
− | + | ||
− | The above | + | The above formulas can be interpreted as: in making prediction for a single new observation, the variance of the estimate will have two components: |
− | 1) | + | 1) <math>\sigma^{2}</math> - the inherent variance within the distribution of x, i.e. the variance that would never be eliminated even with perfect information about the underlying distribution model; |
− | 2) | + | 2) <math>\sigma_{n}^{2}</math> - the variance introduced from the estimation of the mean vector "mu", this component can be eliminated given exact prior information or very large training set ( N goes to infinity); |
− | + | <center>[[Image:BayesianInference_GaussianMean_small_OldKiwi.jpg]]</center> | |
The above figure illustrates the Bayesian inference for the mean of a Gaussian distribution, for which the variance is assumed to be known. The curves show the prior distribution over 'mu' (the curve labeled N=0), which in this case is itself Gaussian, along with the posterior distributions for increasing number N of data points. The figure makes clear that as the number of data points increase, the posterior distribution peaks around the true value of the mean. This phenomenon is known as *Bayesian learning*. | The above figure illustrates the Bayesian inference for the mean of a Gaussian distribution, for which the variance is assumed to be known. The curves show the prior distribution over 'mu' (the curve labeled N=0), which in this case is itself Gaussian, along with the posterior distributions for increasing number N of data points. The figure makes clear that as the number of data points increase, the posterior distribution peaks around the true value of the mean. This phenomenon is known as *Bayesian learning*. | ||
− | + | '''For more information:''' | |
− | [Parametric | + | [[Parametric Estimators_OldKiwi]] |
Revision as of 20:48, 16 March 2008
Contents
Lecture Objective
- Maximum Likelihood Estimation and Bayesian Parameter Estimation
- Parametric Estimation of Class Conditional Density
See also: Comparison of MLE and Bayesian Parameter Estimation_OldKiwi
The class conditional density $ p(\vec{x}|w_i) $ can be estimated using training data. We denote the parameter of estimation as $ \vec{\theta} $. There are two methods of estimation discussed.
MLE ([Maximum Likelihood Estimation])
BPE ([Bayesian Parameter Estimation])
Maximum Likelihood Estimation
Let "c" denote the number of classes. D, the entire collection of sample data. $ D_1, \ldots, D_c $ represent the classification of data into classes $ \omega_1, \ldots, \omega_c $. It is assumed that: - Samples in $ D_i $ give no information about the samples in $ D_j, i \neq j $, and - Each sample is drawn independently.
Example: The class conditional density $ p(\vec{x}|w_i) $ depends on parameter $ \vec{\theta_i} $. If $ X ~ N(\mu,\sigma^2) $ denotes the class conditional density; then $ \vec{\theta}=[\mu,\sigma^2] $.
Let n be the size of training sample, and $ D=\{\vec{X_1}, \ldots, \vec{X_n}\} $. Then,
$ p(\vec{X}|\omega_i,\vec{\theta_i}) $ equals $ p(\vec{X}|\vec{\theta}) $ for a single class.
The **Likelihood Function** is, then, defined as $ p(D|\vec{\theta})=\displaystyle \prod_{k=1}^n p(\vec{X_k}|\vec{\theta}) $, which needs to be maximized for obtaining the parameter.
.. |loglikelihood1| image:: tex
- alt: tex: l(\vec{\theta})=log p(D|\vec{\theta})=\displaystyle log(\prod_{k=1}^n p(\vec{X_k}|\vec{\theta}))=\displaystyle \sum_{k=1}^n log(p(\vec{X_k}|\vec{\theta}))
Since logarithm is a monotonic function, maximizing the Likelihood is same as maximizing log of Likelihood which is defined as $ l(\vec{\theta})=log p(D|\vec{\theta})=\displaystyle log(\prod_{k=1}^n p(\vec{X_k}|\vec{\theta}))=\displaystyle \sum_{k=1}^n log(p(\vec{X_k}|\vec{\theta})) $.
"l" is the log likelihood function.
Maximize log likelyhood function with respect to $ \vec{\theta} $
$ \rightarrow \hat{\theta} = argmax \left( l (\vec{\theta}) \right) $
If $ l(\vec{\theta}) $ is a differentiable function
Let $ \vec{\theta} = \left[ \theta_1, \theta_2, \cdots , \theta_p \right] $ be 1 by p vector, then
$ \nabla_{\vec{\theta}} = \left[ \frac{\partial}{\partial\theta_1} \\ \frac{\partial}{\partial\theta_2} \\ \cdots \\ \frac{\partial}{\partial\theta_p} \right]^{t} $
Then, we can compute the first derivatives of log likelyhood function,
$ \rightarrow \nabla_{\vec{\theta}} ( l (\vec{\theta}) ) = \sum_{k=1}^{n} \nabla_{\vec{\theta}} \left[ log(p(\vec{x_k} | \vec{\theta})) \right] $
and equate this first derivative to be zero
$ \rightarrow \nabla_{\vec{\theta}} ( l (\vec{\theta}) ) = 0 $
Example of Guassian case
Assume that covariance matrix are know.
$ p(\vec{x_k} | \vec{\mu}) = \frac{1}{ \left( (2\pi)^{d} |\Sigma| \right)^{\frac{1}{2}}} exp \left[ - \frac{1}{2} (\vec{x_k} - \vec{\mu})^{t} \Sigma^{-1} (\vec{x_k} - \vec{\mu}) \right] $
Step 1: Take log
$ log p(\vec{x_k} | \vec{\mu}) = -\frac{1}{2} log \left( (2\pi)^d |\Sigma| \right) - \frac{1}{2} (\vec{x_k} - \vec{\mu})^{t} \Sigma^{-1} (\vec{x_k} - \vec{\mu}) $
Step 2: Take derivative
$ \frac{\partial}{\partial\vec{\mu}} \left( log p(\vec{x_k} | \vec{\mu}) \right) = \frac{1}{2} \left[ (\vec{x_k} - \vec{\mu})^t \Sigma^{-1}\right]^t + \frac{1}{2} \left[ \Sigma^{-1} (\vec{x_k} - \vec{\mu}) \right] = \Sigma^{-1} (\vec{x_k} - \vec{\mu}) $
Step 3: Equate to 0
$ \sum_{k=1}^{n} \Sigma^{-1} (\vec{x_k} - \vec{\mu}) = 0 $
$ \rightarrow \Sigma^{-1} \sum_{k=1}^{n} (\vec{x_k} - \vec{\mu}) = 0 $
$ \rightarrow \Sigma^{-1} \left[ \sum_{k=1}^{n} \vec{x_k} - n \vec{\mu}\right] = 0 $
$ \Longrightarrow \hat{\vec{\mu}} = \frac{1}{n} \sum_{k=1}^{n} \vec{x_k} $
This is the sample mean for a sample size n.
MLE Examples: Exponential and Geometric Distributions_OldKiwi
MLE Examples: Binomial and Poisson Distributions_OldKiwi
Advantages of MLE:
- Simple
- Converges
- Asymptotically unbiased (though biased for small N)
Bayesian Parameter Estimation
For a given class, let $ \bf{x} $ be feature vector of the class and $ \bf{ \theta } $ be parameter of pdf of $ \bf{x} $ to be estimated.
And let $ D= \{ \mathbf{x}_1, \mathbf{x}_2, \cdots , \mathbf{x}_n \} \\ $ , where $ \bf{x} $ are training samples of the class
Note that $ \bf{ \theta } $ is random variable with probability density $ p( \bf { \theta } ) $
where
Here is a good example: http://www-ccrma.stanford.edu/~jos/bayes/Bayesian_Parameter_Estimation.html
EXAMPLE: Bayesian Inference for Gaussian Mean
The univariate case. The variance is assumed to be known.
Here's a summary of results:
- Univariate Gaussian density $ p(x|\mu)\sim N(\mu,\sigma^{2}) $
- Prior density of the mean $ p(\mu)\sim N(\mu_{0},\sigma_{0}^{2}) $
- Posterior density of the mean $ p(\mu|D)\sim N(\mu_{n},\sigma_{n}^{2}) $
where
- $ \mu_{n}=\left(\frac{n\sigma_{0}^{2}}{n\sigma_{0}^{2}+\sigma^{2}}\right)\hat{\mu}_{n}+\frac{\sigma^{2}}{n\sigma_{0}^{2}+\sigma^{2}}\mu_{0} $
- $ \sigma_{n}^{2}=\frac{\sigma_{0}^{2}\sigma^{2}}{n\sigma_{0}^{2}+\sigma^{2}} $
- $ \hat{\mu}_{n}=\frac{1}{n}\sum_{k=1}^{n}x_{k} $
Finally, the class conditional density is given by $ p(x|D)\sim N(\mu_{n},\sigma^{2}+\sigma_{n}^{2}) $
The above formulas can be interpreted as: in making prediction for a single new observation, the variance of the estimate will have two components: 1) $ \sigma^{2} $ - the inherent variance within the distribution of x, i.e. the variance that would never be eliminated even with perfect information about the underlying distribution model; 2) $ \sigma_{n}^{2} $ - the variance introduced from the estimation of the mean vector "mu", this component can be eliminated given exact prior information or very large training set ( N goes to infinity);
![BayesianInference GaussianMean small OldKiwi.jpg](/rhea/images/0/0a/BayesianInference_GaussianMean_small_OldKiwi.jpg)
The above figure illustrates the Bayesian inference for the mean of a Gaussian distribution, for which the variance is assumed to be known. The curves show the prior distribution over 'mu' (the curve labeled N=0), which in this case is itself Gaussian, along with the posterior distributions for increasing number N of data points. The figure makes clear that as the number of data points increase, the posterior distribution peaks around the true value of the mean. This phenomenon is known as *Bayesian learning*.
For more information: