m (rearrange into) |
m (add br's) |
||
| Line 26: | Line 26: | ||
== Introduction == | == Introduction == | ||
For real world application, higher sampling rates are preferred because reconstruction doesn't require filter to be as close to the ideal (sharper cutoff). **add picture & source** | For real world application, higher sampling rates are preferred because reconstruction doesn't require filter to be as close to the ideal (sharper cutoff). **add picture & source** | ||
| − | + | <br><br> | |
Assume <math> {x}_{c}(t) </math> is a bandlimited CT signal, | Assume <math> {x}_{c}(t) </math> is a bandlimited CT signal, | ||
<math> {x}_{1}[n] </math> is a DT sampled signal of <math> {x}_{c}(t) </math> with sampling period <math> {T}_{1} </math> | <math> {x}_{1}[n] </math> is a DT sampled signal of <math> {x}_{c}(t) </math> with sampling period <math> {T}_{1} </math> | ||
| − | + | <br><br> | |
| − | + | ||
This leads to the question, can you use | This leads to the question, can you use | ||
Revision as of 13:28, 14 October 2014
Frequency Domain View of Upsampling
Why Interpolator needs a LPF after Upsampling
A slecture by ECE student Chloe Kauffman
Partly based on the ECE438 Fall 2014 lecture material of Prof. Mireille Boutin.
Outline
- Introduction
- Derivation
- Example
- Conclusion
Introduction
For real world application, higher sampling rates are preferred because reconstruction doesn't require filter to be as close to the ideal (sharper cutoff). **add picture & source**
Assume $ {x}_{c}(t) $ is a bandlimited CT signal,
$ {x}_{1}[n] $ is a DT sampled signal of $ {x}_{c}(t) $ with sampling period $ {T}_{1} $
This leads to the question, can you use
$ {x}_{1}[n] = x_{c}(n{T}_{1}) $
to obtain
$ {x}_{u}[n] = {x}_{c}(n{T}_{u}) $, a signal sampled at a HIGHER sampling frequency than $ {x}_{1}[n] $, without having to fully reconstruct $ {x}_{c}(t) $
Derivation
