Line 61: Line 61:
  
 
Plot of <math>X_{1}(\omega)</math>:
 
Plot of <math>X_{1}(\omega)</math>:
 +
 +
https://www.projectrhea.org/rhea/images/4/4f/X1wplot.png Repeats every <math>2\pi<\math>
  
 
<font size="4">Sampling <u>Below</u> Nyquist Frequency</font>
 
<font size="4">Sampling <u>Below</u> Nyquist Frequency</font>

Revision as of 17:50, 2 October 2014

DTFT of a Cosine Signal Sampled Above and Below the Nyquist Frequency

A slecture by ECE student Andrew Pawling

Partly based on the ECE438 Fall 2014 lecture material of Prof. Mireille Boutin.



In this slecture we will look at an example that illustrates the Nyquist condition. When a signal is sampled, frequencies above half the sampling rate cannot be properly represented and result in aliasing.



Lets look at a pure tone frequency F4 = 349Hz

We will represent this tone as a cosine signal, $ cos*(2\pi349t) $



Sampling Above Nyquist Frequency

For this signal $ f_{s} > 2f_{m} = 2(349)Hz = 698Hz $ or else aliasing will occur. We will choose a sampling frequency of $ f_{s} = 1/T_{1} = 1000Hz $.


$ \begin{align} x_{1}(n) &= x(nT_{1}) \\ &= cos(2\pi349nT_{1}) \\ &= cos(\frac{2\pi349n}{1000}) \\ &= \frac{1}{2}(e^{\frac{-j2\pi349n}{1000}} + e^{\frac{j2\pi349n}{1000}}) \\ \\ \\ \end{align} $

$ Note\ that:\ 0 < |\pm2\pi\frac{349}{1000}| < \pi $

This means the original signal can be properly represented when sampled at $ f_{s} = 1000Hz. $

Using the discrete-time Fourier transform pair for cosine:

$ x[n] \ \ \ \ \ \ \ \ \ \ -----> \ \ \ \ X(\omega) $

$ cos(\omega_{0}n) \ \ \ \ -----> \ \ \ \ \pi\sum_{k=-\infty}^\infty (\delta(\omega -\omega_{0}+2\pi k) + \delta(\omega + \omega_{0}+2\pi k)) $

$ \begin{align} X_{1}(\omega) &= \pi \sum_{k=-\infty}^\infty(\delta(\omega - 2\pi\frac{349}{1000} +2\pi k) + \delta(\omega + 2\pi\frac{349}{1000} + 2\pi k)) \\ &= rep_{2\pi}\pi (\delta(\omega - 2\pi\frac{349}{1000}) + \delta(\omega + 2\pi\frac{349}{1000})) \\ \end{align} $

Plot of $ X_{1}(\omega) $:

X1wplot.png Repeats every $ 2\pi<\math> <font size="4">Sampling <u>Below</u> Nyquist Frequency</font> For this signal <math>f_{s} > 2f_{m} = 2(349)Hz = 698Hz $ or else aliasing will occur. We will choose a sampling frequency that does not satisfy this condition this time. Let's use $ f_{s} = 1/T_{2} = 500Hz $.


$ \begin{align} x_{2}(n) &= x(nT_{2}) \\ &= cos(2\pi349nT_{2}) \\ &= cos(\frac{2\pi349n}{500}) \\ &= \frac{1}{2}(e^{\frac{-j2\pi349n}{500}} + e^{\frac{j2\pi349n}{500}}) \\ \\ \\ \end{align} $

$ Note\ that:\ \pi < |\pm2\pi\frac{349}{500}| < 2\pi $

This means the original signal cannot be properly represented when sampled at $ f_{s} = 500Hz. $

Using the discrete-time Fourier transform pair for cosine again:

$ x[n] \ \ \ \ \ \ \ \ \ \ -----> \ \ \ \ X(\omega) $

$ cos(\omega_{0}n) \ \ \ \ -----> \ \ \ \ \pi\sum_{k=-\infty}^\infty (\delta(\omega -\omega_{0}+2\pi k) + \delta(\omega + \omega_{0}+2\pi k)) $

$ \begin{align} X_{1}(\omega) &= \pi \sum_{k=-\infty}^\infty(\delta(\omega - 2\pi\frac{349}{500} +2\pi k) + \delta(\omega + 2\pi\frac{349}{500} + 2\pi k)) \\ &= rep_{2\pi}\pi (\delta(\omega - 2\pi\frac{349}{500}) + \delta(\omega + 2\pi\frac{349}{500})) \\ \end{align} $

Plot of $ X_{2}(\omega) $:

Alumni Liaison

Basic linear algebra uncovers and clarifies very important geometry and algebra.

Dr. Paul Garrett