(Relationship to Laplace)
(Relationship to Laplace)
Line 23: Line 23:
 
Likewise the unilateral Z-transform is simply the one-sided Laplace transform of the ideal sampled function.  Both assume that the sampled function is zero for all negative time indices.
 
Likewise the unilateral Z-transform is simply the one-sided Laplace transform of the ideal sampled function.  Both assume that the sampled function is zero for all negative time indices.
  
The [[Bilinear transform_ECE301Fall2008mboutin]] is a useful approximation for converting continuous time filters (represented in Laplace space) into discrete time filters (represented in z space), and vice versa. To do this, you can use the following substitutions in <math> H(s) </math> or <math> H(z) </math>  :
+
The Bilinear transform is a useful approximation for converting continuous time filters (represented in Laplace space) into discrete time filters (represented in z space), and vice versa. To do this, you can use the following substitutions in <math> H(s) </math> or <math> H(z) </math>  :
  
 
<math>  s =\frac{2}{T} \frac{z-1}{z+1} </math> from Laplace to z (Tustin transformation);
 
<math>  s =\frac{2}{T} \frac{z-1}{z+1} </math> from Laplace to z (Tustin transformation);
  
 
<math>  z =\frac{2+sT}{2-sT} </math> from z to Laplace.
 
<math>  z =\frac{2+sT}{2-sT} </math> from z to Laplace.

Revision as of 16:25, 3 December 2008

Basic definition of the Z-Transform

The Z-transform of a sequence is defined as $ H(z) = \sum^{\infty}_{n = -\infty} h[n]z^{-n} $

The complex plane

In order to get further insight into the relationship between the Fourier Transform and the Z-Transform it is useful to look at the complex plane or z-plane. Take a look at the complex plane:

Zplane1 ECE301Fall2008mboutin.jpg

The Z-plane is a complex plane with an imaginary and real axis referring to the complex-valued variable z. The position on the complex plane is given by rⅇⅈω , and the angle from the positive, real axis around the plane is denoted by ω. X(z) is defined everywhere on this plane. X(ⅇⅈω) on the other hand is defined only where |z|=1, which is referred to as the unit circle. So for example, ω=1 at z=1 and ω=<apply>π</apply> at z=-1. This is useful because, by representing the Fourier transform as the z-transform on the unit circle, the periodicity of Fourier transform is easily seen.

Region of Convergence

The region of convergence, known as the ROC, is important to understand because it defines the region where the z-transform exists. The ROC for a given x[n] , is defined as the range of z for which the z-transform converges. Since the z-transform is a power series, it converges when x[n]z−n is absolutely summable. Stated differently, $ ROC = \left\{ z : \left|\sum_{n=-\infty}^{\infty}x[n]z^{-n}\right| < \infty \right\} $ must be satisfied for convergence. This is best illustrated by looking at the different ROC's of the z-transforms of αnu[n] and αnu[n−1].

Relationship to Laplace

The bilateral Z-transform is simply the two-sided Laplace transform of the ideally sampled time function

$ x_{s}(t) = \sum_{n=-\infty}^{\infty} x(nT) \delta(t-nT) = \sum_{n=-\infty}^{\infty} x[n] \delta(t-nT) \ $

where $ x(t) $ is the continuous-time function being sampled, $ x[n]=x(nT) $ the nth sample, $ T $ is the sampling period, and with the substitution: $ z = e^{sT} $.

Likewise the unilateral Z-transform is simply the one-sided Laplace transform of the ideal sampled function. Both assume that the sampled function is zero for all negative time indices.

The Bilinear transform is a useful approximation for converting continuous time filters (represented in Laplace space) into discrete time filters (represented in z space), and vice versa. To do this, you can use the following substitutions in $ H(s) $ or $ H(z) $  :

$ s =\frac{2}{T} \frac{z-1}{z+1} $ from Laplace to z (Tustin transformation);

$ z =\frac{2+sT}{2-sT} $ from z to Laplace.

Alumni Liaison

Basic linear algebra uncovers and clarifies very important geometry and algebra.

Dr. Paul Garrett